American Standard - 710007-100

Below are all the different types of American Standard. Select the device of your choice, to download the manual

Contents

1 INSTALLATION PROCEDURES Determine side at which the door will pivot left or right The pivot side should be opposite the showerhead Measure width of the opening at the centerline of bottom NOTE This door swings out only Verify door will clear any obstructions before installing Flat edge of threshold should face inside of shower Identify end of threshold which will be pivot side Mark the OPPOSITE end for drilling Cut threshold to size W measured in step 1 THRESHOLD IMPORTANT ENSURE BASE IS LEVEL W MEASURE Record Measurement W CENTERLINE TOP VIEW inches FLAT EDGE CUT END OPPOSITE PIVOT SIDE For best results use a 32 tooth hacksaw blade and a miter box Position pivot plate on threshold with ...